Star TSP-100 Thermal Printer (Legacy)
The Star TSP-100 is a thermal printer previously sold by Rezku in the DHCP configuration.
Specs:
Paper type: Thermal paper
Paper Size: 3-inch (80mm)
Test Print
- Turn off the printer
- Hold the FEED button
- Turn on while holding FEED button
- Hold FEED until test print begins to print
Loading Paper
- Turn off the printer
- Open the top cover
- Remove the spent paper core
- Insert new roll with the paper feeding from below.
- Close the top cover making sure it latches
- Turn the printer back on
Related Articles
Star SP-700 Impact Printer (Legacy)
The Star SP-700 is an impact printer previously sold by Rezku in the DHCP variation. This printer uses standard paper (not thermal) and a replaceable ribbon. Test Print Turn the printer off using the rocker switch Hold the FEED button Turn the ...Star mC-Print3 (MCP30, MCP31)
Two versions of the printer are available from Rezku. The models vary slightly in connectivity between models. The MCP30 does not have bluetooth or lightning connectivity; the MCP31 does. The variation sold by Rezku is the MCP-LBi. Specifications ...TMm30 Printer Hardware Setup
TmM30 Printer For TMm30 (gen-1) printers please refer to the archived article. Top Panel -- Buttons Power -- Press once to turn the power on. Press again to turn the power off. May be equipped with a protective cover requiring a sharp object such as ...TM-u220 Printer Hardware and Settings
EPSON TM-U220 NOTE: All printers should be sold by Rezku. Non-Rezku TM-U220 printers are notorious for being inoperable with our system, as different POS companies use different firmware options. Quick Info Uses standard bond paper rolls Can use 3 ...Mobile Case for ID6 2.0 (Legacy)
Assembly Video: The MagTek iDynamo and mobile case are used to provide table-side ordering and payment. Features include: NOTE: This case is designed for use with the iPad Mini Generation 6 (2022 release). The iPad Mini Gen 6 uses a USB-C charger ...