Simplicity Stand

Simplicity Stand

Simplicity Stand




The Simplicity Stand is light, all-in-one and features an adjustable angle. It comes in one size, compatible with iPad 10.2 (Gen 8/9)


Simplicity Stand Assembly

The Stand comes in one box that includes the metal stand, plastic iPad bracket and 6 screws. After unboxing, follow these steps:


1. Remove the plastic cover from the baseplate by carefully flexing at the corners.



2. Route the iPad charging cable through the plastic bracket as shown.

  • TIP: Secure the cable with a small piece of scotch tape to keep it in place.
  • NOTE: Be sure to use a sufficiently long iPad charging cable to reach your desired power outlet location. The one included with the iPad is quite short.




2. Place the iPad into the mounting bracket and plug the charging cable into the iPad.

3. Slide the iPad and bracket into the stand.



4. Secure the bracket to the stand using the 6 supplied screws.

5. Install the optional Stand Swivel.

5. Route the cable over the baseplate and secure by replacing the plastic cover.
















    • Related Articles

    • Swivel Mount for POS Stands

      Swivel Mount for POS Stands The swivel mount can be used with the following stands: Simplicity Stand Any stand using the Stability Base (Pro, ID6) NOTE: The swivel MUST be screwed or bolted into the countertop for mounting. Mounting hardware is NOT ...

    • Pro Stand + CFD

      Pro Stand The Pro Stand is an all-metal frame with backplate and stand combo. The sizes it currently comes in (published late 2022): iPad 10.2 (Gen 8/9) iPad Pro 12.9 (Gen 3/4/5) This stand is used for stationary POS registers and does not feature an ...

    • TM-u220 Printer Hardware and Settings

      EPSON TM-U220 NOTE: All printers should be sold by Rezku. Non-Rezku TM-U220 printers are notorious for being inoperable with our system, as different POS companies use different firmware options. Quick Info Uses standard bond paper rolls Can use 3 ...

    • Mobile iPad Case for Adyen Card Readers

      Vault Connect Mobile Case iPad The case is compatible with the current iPad Mini (as of August 2024) Gen 6. Readers Both the Adyen AMS1 and NYC1 can be used while mounted to or disconnected from the handheld case. When docked, both card readers ...

    • Mobile Case for ID6 2.0 (Legacy)

      Assembly Video: The MagTek iDynamo and mobile case are used to provide table-side ordering and payment. Features include: NOTE: This case is designed for use with the iPad Mini Generation 6 (2022 release). The iPad Mini Gen 6 uses a USB-C charger ...