Ubiquiti Amplifi Router Setup

Quick Facts

The Amplifi router is an all-in-one router and access point ideal for smaller venues with open floor plans or centrally located stationary registers.

• Internet comes from your ISP (internet service provider) through a modem they provide.
  • Internet allows you to reach off-site computers like websites, credit card processing servers and the Rezku servers.
• The Amplifi router provides your local networking (LAN), connecting your POS devices (printers and iPads).

Amplifi Router Setup

Follow the instructions provided in the short setup guide included in the box.

1. Plug in the Amplifi Router.
2. Run an ethernet cable from your ISP router to the port marked with a globe (internet) on the router.
3. Follow the on-screen setup steps to configure the Amplifi router and set the wifi name and password.
4. Plug any LAN based printers into the additional network ports in the router.
5. Connect the POS iPads to the Amplifi Router's Wifi Network.

Contact Rezku Support for assistance assigning your kitchen printers on the POS.